Make the physical connections for each network device with the following requirements.
1. Connect PC0 to the Ethernet 2 port on the WRT300N wireless router using the correct cable.
2. Connect the switch using the FastEthernet0/1 port to the Ethernet 1 port on the WRT300N wireless router using the correct cable.
3. Connect the web server to the FastEthernet0/2 port on the switch using the correct cable.
4. Connect the printer to the FastEthernet0/3 port on the switch using the correct cable.
5. Connect PC1 to the switch via FastEthernet0/4 and connect PC2 to FastEthernet0/5. PC0 is connected to the switch using a console cable; you should not change this connection.



Answer :

Other Questions