Answer :
In a circuit, to measure current in a single component or device, meter leads are placed in series with the component. Here's a step-by-step explanation:
1. **Locate the Component:** Identify the specific component or device in the circuit for which you want to measure the current.
2. **Prepare the Multimeter:** Set your multimeter to measure current (usually marked with an 'A' symbol). Ensure the leads are plugged into the correct sockets on the multimeter based on the current measurement range you expect.
3. **Open the Circuit:** To place the meter in series with the component, you need to open the circuit at a suitable point to insert the meter leads.
4. **Connect the Leads:** Once the circuit is open, connect the meter leads in series with the component. The positive lead (usually red) is connected to the side of the component closest to the positive terminal of the power source, and the negative lead (usually black) is connected to the other side.
5. **Close the Circuit:** After the connections are made, ensure that the circuit is properly closed so that current flows through the component and the meter.
6. **Read the Current:** With the circuit closed and the multimeter set to the correct range, you can now read the current flowing through the component on the multimeter display.
By placing the meter leads in series with the component, you create a path for the current to flow through the meter, allowing you to accurately measure the current passing through that specific component.
